Saturday, 7 November 2020

9. Yeti or not featuring Lawn Fawn

Hi there, welcome to my blog :)

Thank you for visiting this page, today I will be sharing how I created this card. 

Like always I stamped out my images using memento black ink onto some Lawn Fawn 80lb cardstock. 

Next I then fussy cut them out and used my copic ciao markers to colour them in. 

I then decided to use my Karin markers in Cerise and Lilac to create a pinkish purple sky scene.

I then used my white-gold watercolour from the Starry colours Gansai Tambi set to add some sparkle, as usual I could not have enough sparkle so I went ahead and added some more sparkle by spraying on some
Tsukineko Sparkle Sheer Shimmer Spritz.

I made sure this was all dry properly with my heat tool, once this was fully dry I set it aside.




I then used some pixie dust sparkle paper from Lawn Fawn to to cut out some hillsides. I used some of my tape runner to adhere these onto my cardstock which I created my watercolour sky on previously. 

I then adhered my stamps on this cardstock. I then used some of the sentiments from the same set, I die-cut the word cool from Oliver's stitched ABCs and the rest of them I used some heat embossing onto some baby pink cardstock I had. 

I then adhered these onto my card as well. 




I think applied the whole card into a card base, and for finishing touches I added some stickles glue in stardust as well as some wink of stella! ( Can never have enough sparkles).

Lastly I added some white lines with my white sakura gelly roller pen to create some dimension. 

I hope you enjoyed reading this method!




Until next time take care and stay safe. I hope you have an amazing day!

Wednesday, 4 November 2020

8: Booyah! Ghouls Night Out and waving pull tab starter set by Lawn Fawn

 Booyah!

Thanks for visiting my blog- today I am going to share with you how I created this card:

1) Stamped, coloured with copic markers and fussy cut all my stamps from the Booyah! Lawn Fawn stamp set. 

2) I used blue, pink and purple Karin makers to create a watercolour background, but before this I used a stamped some stars with Versamark water stamp pad, wow white opaque embossing powder and my heat tool. 



3) On the bottom half of the card I used a cloud stencil by Clearly besotted with some shaded lilac distress ink pad and my mini blending tool. 

4) Using the starter waving pull tab, I assembled my first ghoul in the middle.

5) I then added the other two ghouls on the right and left respectively using some clear acetate. This is to make sure all the ghouls are moving in sync. 

6) I then used the sentiment "Ghouls night out" from the Booyah stamp set and heat embossed with wow white opaque embossing powder and my heat tool. 

7) On another card I created some orange background using distress ink pads.

8) I sprayed some shimmer spritz by Tsukineko to add some shimmer as well as some liquid stardust by Lawn Fawn. 

9) I used this to created my letters Booyah from the Oliver's stitched ABC set.



10) I used the same orange background as a backing for my sentiment. 

11) I used a spider sprinkle from Lucy's little things to stick inside the pull tab, so it looked like the spider was calling out "Boo!"



I had so much fun creating this card, it did take awhile but I was happy with the end result :)

Wishing you an awesome day/night!




Tuesday, 3 November 2020

7: Merry Christmas featuring Oh Snap! Yeti or Not and Thanks a Latte - Lawn Fawn

 Hello everyone :) 

I made this card some time ago and only just got around to adding it to my blog! 

To create this card I first started with cutting out some hillsides with the stitched hillside die from Lawn Fawn.


I did not want to keep this plain, so I used some tumbled glass distress ink with my mini ink blender to create a pop of colour on the snowy hillside. 

I then started stamping on some Lawn Fawn 80lb white card, with some gingerbread cookies from Oh Snap! some candy cane sticks from Thanks a Latte ( these have become my current festive favourite as you probably guessed from my previous blog) and lastly some baubles and Christmas trees from Yeti or Not stamp set. 

I used some copic ciao pens to colour all of these in and then fussy cut them all out. 

I die-cut the word "Merry" onto some gold metallic paper and added 4-5 of these together to add some dimension. 

I assembled these all onto the card as below, with some foam squares and tombow glue pen.

I added the sentiment "Christmas" which I heat embossed with gold tinsel onto some black cardstock.

To add some extra pizzazz I then used those baubles which I stamped out to make it look like there were Christmas lights hanging off the word "Merry" as well as using a piping bag I stamped, coloured and fussy cut from the "baked with love" stamp set. 

I added some Shimmer Spritz by Tsukineko and using Wink of Stella to add some shimmer to the baubles.

I hope you enjoyed reading this as much as I did creating this card :)

I hope you have a wonderful day!




Friday, 23 October 2020

6. Thanks a Latte 🍡 and Oh Snap! Featuring Lawn Fawn

Hi there, 

I am back here, and today I would like to share a fun card with you for the Lawn Fawn Challenge 87 - Card Sketch. This is actually my first ever entry for any challenge and I had a lot of fun creating this card. 

Here is how I created this card. 






1) I stamped some images from Thanks a Latte and Oh Snap! stamp set, I also stamped the bow from Booyah stamp set onto some 80lb Lawn Fawn white cardstock.

I used the mirror stamp from My Favourite Things for one of the candy sticks, this will allow me to create a heart shaped candy.

2) I didnt have any matching die sets for, so I just fussy cut them all out instead. 

3) I then used some Spectrum Noir Triblend pens to colour all the stamps. I used the Tan, Coral and Dark Red blend pens for the entire card.

4) I then added some detail using my White Sakura gelly roll pen and stickles gel in star dust for the cream topping. 

5) At this point I decided I wanted to make a mini slim line card, so I cut some cardstock and added some Let it Shine paper for my background. 

6) Finally I assembled all the stamps using some foam adhesives and some tombow glue.


I was really happy with the way this card turned out. 

Thank you for visiting my blog, I hope you have a great day :)



 




Thursday, 22 October 2020

5. Driving home for Christmas featuring Lawn Fawn Christmas car critters

Hello, thank you for visiting my blog. 

Here is how I made my Driving Home for Christmas Card:

1. I stamped the car from the Car Critters stamp set onto some white card stock.

2. I stamped the three gingerbread critters from the Tiny Christmas stamp set as well as the snow, reindeer and wreath from the car critters Christmas stamp set.

3. Finally I stamped the three Christmas trees in Yeti or Not stamp set.



4. Once these were stamped, I then used my copic markers to colour all the stamps in. 

5. For the stamps I didn't have a die-set for, I fussy cut them instead. 

6. I used some Pixie Dust paper from Lawn Fawn to cut out some hills.

7. I then used three distress oxide inks: Worn lipstick, Picked raspberry and spun sugar to create a pink sky. Next I then used some liquid stardust and added some water to it, this made it an easier consistency to flick onto my paper using a paintbrush and the side of my acrylic block. 

8. Once I was happy with my background, I used my tape runner to attach my snowy hill to my sky. 



9. I then assemble the car and critters inside the car with some foam squares.

10. I used some white opaque embossing powder on some pink card stock to emboss the words "driving, for and christmas". I cut the ends to create a banner look and attached some pink let it shine paper behind. 

11. I used my heat tool to set this and applied to my card. 

12. I used the oliver stitched dies to die-cut the word home, I die-cut this with pixie dust paper and some light pink cardstock to give it a 3D look. 

13. Finally I glued this onto the card and added some more let it shine paper behind the card and added some sparkle using my Spectrum Noir clear sparkle pens and some stickles glue in stardust to the snowy bed on top of the car.


Thank you so much for reading my blog, hope you enjoyed reading it as much as I enjoyed making this card. 



Thursday, 27 August 2020

4. Birthday Chicks by My Favourite Things. A Shaker and Pop-up Card 🎈πŸ₯🧁


 Hello everyone, welcome to my blog thank you for visiting!

When I saw these Birthday Chicks stamps by My Favourite Things I just had to have them in my collection. I absolutely love these chicks and the other cupcake stamps included in the set.

I started off with die-cutting the Wish sentiment by My Favourite Things (MFT) on some white card stock and then mounted some acetate to the back to create my window.

Next I applied some foam tape around the window, this will allow some room for the confetti to move around as it is going to be shaker card.

For my filler I used some polka parade sprinkles along with some chunky glitter by Lawn Fawn.

I took a piece of grey coloured card stock which I trimmed to be smaller than the card stock I used to die-cut the Wish sentiment on. I used one of the smallest dies from my pop-up trio creative cuts dies from MFT as I wanted to have some chicks to pop-up as the card opens.

I then used my glue tape to add this piece of card stock behind the card stock to create my shaker card.

Finally I stamped, coloured all my chicks in Copic markers and fussy cut them all out.

I used some foam adhesives to adhere these chicks around the sentiment and inside the card too:




To complete the wish sentiment, I added the make a and birthday chick sentiment from the same stamp set and the Yay!Yay!Yay! mini sentiment inside the card again with my Stamp Perfect platform. This allows me to correctly align the sentiments.

I used some Sweet Pea crystals I got from Little things from Lucy's Cards for embellishments, gluing them on with some multi matte medium and then finally added some Wink of Stella shimmer to all the chicks party hats, cupcakes and the candles. 


I hope you like my shaker card and thank you for reading my blog! 


Wednesday, 26 August 2020

3: Sweetest Flavour by Lawn Fawn and Sweet Treats by Clearly Besotted🍦



Hello and Welcome to my blog!


A just because card for my sweet niece Bella who loves Ice Cream πŸ¦

I started off with initially stamping the ice cream stamp from Sweet Treats stamp set by Clearly Besotted using Versamark watermark ink and then set this with my heat tool and white glowing pearl embossing powder from Sweet Dixie. I used two Distress inks namely Spun sugar and Shaded lilac to bring out the ice cream stamps as the heat embossed areas resisted the ink.

Next I went onto stamping some ice cream cones from the Sweetest flavour stamp set by Lawn Fawn.
I coloured using Copic Ciao marker pens, and then die-cut them with the coordinating die-set.



I used the sentiment from the same set, stamping it onto some plain black card, repeating the process for embossing but this time using the Opaque Vanilla White embossing powder by Wow.

I finished off the card by adding some Polka Parade sprinkles from Little things from Lucy's Cards and of course finally some shimmer from my Wink of Stella Pen.



Tuesday, 25 August 2020

2: As Cute As Can Be by Clearly Besotted and Belated Birthday by Lawn Fawn πŸˆπŸ§πŸŽ‚πŸŽ


Hi there, thank you for visiting my blog!

I was inspired by Michelle from The Card Grotto to create this card, I started off by creating my background with blending distress inks along with the Building Blocks stencil by Clearly Besotted. 
I used dried marigold and spun sugar distress ink for this:



Next I stamped my cute critters onto some Copic friendly card stock. I coloured these in with some Copic Ciao markers and I fussy cut them all out. 

I took some plain black card stock and stamped my sentiment using Versamark watermark ink and some Wow Embossing Powder called vanilla white opaque, and set this using my heat tool. 

I assembled all my critters and the sentiment with some foam adhesives. 

For some finishing touches I added some shimmer using Spectrum Noir Sparkle.

Once again thank you for visiting my blog hope you enjoyed reading and hope you like my card :)



Tuesday, 18 August 2020

1: Hello Cupcakes and Sweet Treats by Clearly BesottedπŸ§πŸ¦›




Hello there, thank you for visiting my blog today.

This card was one of my very first card creations which features the Hello Cupcake and Summer Treats stamp set from Clearly Besotted.

I was inspired by Amanda from the Little Crafty Pill, in particular her Cute Birthday Card.

I started off by stamping the little cupcakes from Summer Treats stamp set onto some Neenah Classic solar white card stock with some acrylic stamping blocks from Papermania. I coloured these using some Faber-Castell Felt tip pens.


                                     
I added some vellum paper on top of the card stock. I went onto stamping the three cute hippos from the Hello Cupcake stamp set. I used Faber-Castell felt tip pens and my Prismacolour Premier colouring pencils for these and then fussy cut them out. Once cut I stuck these in place using my foam adhesives to give it a three-dimensional look.


Next I then used some grey card stock and embossed the Hello Cupcake sentiment from the same stamp set as the hippos using the some Sweet Dixie White Glowing embossing powder. I added some shimmer using the Wink of Stella pen over the top to give it a metallic finish. I also added some shimmer effect using this pen on the cupcake itself and some little silver gems to each cupcake as some final finishing touches.

I hope you like my card and thank you for reading my blog!

Full list of supplies below:
Papermania acrylic stamping blocks
Neenah Classic Crest Solar White
Clearly besotted stamps Hello Cupcake and Summer treats stamp set
Faber-Castell Felt tip pens
Prismacolour Premier coloured pencils
Wink Of Stella glitter marker
Sweet Dixie "White Glowing" Pearl Precious Gems Embossing Powder
Back to Top